The version number is displayed as the window caption


Version         Changes
----------      ----------
                TODO - Simulated gases in simulation mode get wrong names when sliders are moved, but calculations on the
                windows to the right are correct.

2020 11 24      MFC A flow moving average data is reset when gas is changed

2020 10 09      Flows-graph modified
                Project brought up to 10.4, with RT 3.0
                Memo resize

2020 09 15      Pump initialization improvements

2020 06 15      Remembers used gas - warns when changing
                More reliable pump discovery
                Flow deviation warnings - good for unreached high flows
                Display setpoints in graph

2020 01 16      Pump speed function accuracy enhancement for pump speed below 900 Hz
                Pump speed function accurate all the way up to wery high speeds near 48000 Hz
                Volumetric flow format changed from 123.4 mln/min to 12345 mln/min in order to display > 1 liter flows correctly

2019 12 04      Relative humidity calculated and shown where applicable, for H2O

2019 11 13      Runtime step program edit disabled
                Step program and fluid design saved each time program is started
                Custom fluid mixture designer
                Bugfix: Fluid pump 0-flow setting now stops pump correctly
                Mixture step program and fluid design is saved each time a segment program is started. Edits are not saved

2019 08 12      Opened project after some time and the MFCs were ordered as mln/min. Software does not understand this.
                Changing the mfc's manually to g/min. This seems to be the actual intended procedure.
                Added custom temp and air pressure for ini and flow table, for user custom values such as Mexico city 750 mbar

2018 10 23      Max flow limit for MFC was in some cases calculated so that the result was one digit too large.
                Using this flow resulted in 0-flow.
                Likewise in some cases the MFC seems to be unable to achieve the smallest continuous flow.
                Added Codesite logging to file.
                Flow visualization as statusbar and graph.
                Added moving average to better reflect gas mixture at process, sample size is defined in the ini file.
                Different type totalizers for various gas tables now scale properly, was necessary for pulsed flow.