Published references
|
These publications have a reference to ProboStat™ or other NORECS products
All 1-25 26-50 51-75 76-100 101-125 126-150 151-175 176-200 201-225 226-250 251-275 276-300 301-325 326-350 351-375 376-400 401-425 426-450 451-475 476-500 501-525 526-550 551-575 576-600 601-625 626-650 651-675 676-An operando calorimeter for high temperature electrochemical cells
ID=487| Authors |
|
| Source |
Time of Publication: 2018
|
| Abstract | Operando calorimetry has previously been utilized to study degradation, side reactions, and other electrochemical effects in electrochemical cells such as batteries at or near room temperature. Calorimetric data can provide important information on the lifetime and thermal properties of electrochemical cells and can be used in practical engineering applications such as thermal anagement. High temperature electrochemical cells such as solid oxide fuel cells or electrolyzers can also benefit from operando calorimetry, although to our knowledge no such unit has been eveloped commercially. Herein, we report an operando calorimeter capable of simultaneous calorimetry and electrochemistry at temperatures up to 1,000 °C and in both oxidizing and reducing atmospheres. The calorimeter is constructed by modifying a commercial apparatus originally designed to study high temperature electrochemical cells in various gas environments. We utilize a grey - box, nonlinear system identification model to analyze calorimetric data and achieve an electrochemical cell power sensitivity of 16.1±11.7 mW. This operando calorimeter provides the tools needed to study both the thermal and kinetic behavior of electrochemical cells at elevated temperatures. |
| Remark | Link |
Ohmically heated ceramic asymmetric tubular membranes for gas separation
ID=486| Authors |
|
| Source |
Journal of Membrane Science
Volume: 564,
Pages: 598-604 Time of Publication: 2018 |
| Abstract | Mixed conducting dense ceramic gas separation membranes can be used in air separation for oxy-fuel and pre-combustion processes in CO2 capture schemes for emission-free power plants and chemical industries. Such membranes operate at high temperatures, and the energy penalty associated with heating the membranes with external electrical heaters or burners via the feed or sweep gas can be significantly reduced by adopting direct ohmic heating of the membrane. We demonstrate that tubular asymmetric gas separation membranes of La2NiO4+δ and La0.87Sr0.13CrO3-δ can be heated to temperatures in excess of 800 °C by passing current through them, and that such ohmically heated tubular membranes can be operated in an oxygen potential gradient to selectively separate oxygen from a feed gas mixture. We highlight the associated challenges with heat transport and thermal gradients and undertake numerical simulations to investigate the effect of materials properties on heating power and heat distribution in the tubes. |
| Keywords | Membranes, ceramic, dense; Gas separation; Ohmic heating, La2NiO4; LaCrO3 |
| Remark |
https://doi.org/10.1016/j.memsci.2018.07.070 Link |
A novel anode for solid oxide fuel cells prepared from phase conversion of La0.3Sr0.7Fe0.7Cr0.3O3-δ perovskite under humid hydrogen
ID=485| Authors |
|
| Source |
Electrochimica Acta
Volume: 284,
Pages: 303-313 Time of Publication: 2018 |
| Abstract | A novel anode for solid oxide fuel cells (SOFCs), consisting of a Ruddlesden-Popper compound, La0.6Sr1.4Fe0.4Cr0.6O3.8, with in situ exsolved α-Fe nanoparticles (RP-LSF + Fe), is prepared from the phase conversion of the La0.3Sr0.7Fe0.7Cr0.3O3-δ (LSFCr-3) perovskite under humid H2 at 800 °C. On the surface of the RP-LSF + Fe anode, Fe cations are presented to be a mixture of Fe2+ and Fe3+, of which the average valence is lower than that in the bulk (Fe3+). The coverage of atomic hydrogen on the RP-LSF + Fe anode is over 0.8 in the pH2 range of 0.017–0.27 atm, implying a significant effect of these small amount (∼8 mol% on the surface) of exsolved Fe nanoparticles (∼200–300 nm) on promoting the dissociative absorption of H2. The charge transfer resistance is found to be closely related to the concentration of surface oxygen vacancies of the oxide matrix. The addition of catalytic amount of Ni (1–3 wt.%) greatly improves the fuel flexibility of the RP-LSF + Fe anode. Furthermore, it contributes to acceleration the phase conversion of the LSFCr-3 perovskite and reduced time for in situ preparation of the RP-LSF + Fe anode. The RP-LSF + Fe anode with 2.7 wt.% Ni exhibits a stable cell performance under 2.7%H2O+1:1-(H2:CO) and 2.7%H2O + CH4 for ∼30 h. It costs shortest time (30 h) to reach a stable cell voltage of 0.76 V at a galvanostatic current density of 0.25 A/cm2 under humid H2, which is clearly an active and stable anode material for SOFCs. |
| Keywords | Solid oxide fuel cell, Oxide anode, Phase conversion, Electrodics, Fuel flexibility |
| Remark |
https://doi.org/10.1016/j.electacta.2018.07.132 Link |
Assessment of layered La2-x(Sr,Ba)xCuO4-δ oxides as potential cathode materials for SOFCs
ID=484| Authors |
|
| Source |
International Journal of Hydrogen Energy
Volume: 43,
Issue: 32,
Pages: 15492-15504 Time of Publication: 2018 |
| Abstract | In this paper, selected layered cuprates with La2-x(Sr,Ba)xCuO4-δ formula are evaluated as candidate cathode materials for Solid Oxide Fuel Cells. Two synthesis routes, a typical solid state reaction and a sol-gel method yield well-crystallized La1.5Sr0.5CuO4-δ, La1.6Ba0.4CuO4-δ and La1.5Sr0.3Ba0.2CuO4-δ materials having tetragonal I4/mmm space group, but differing in morphology of the powder. Fine powders obtained using sol-gel route seem to be more suitable for preparation of the porous cathode layers having good adhesion on the solid electrolyte, but powders obtained after the solid state route can be also successfully utilized. Investigations of structural and transport properties, the oxygen nonstoichiometry and its change with temperature, thermal expansion, as well as chemical and thermal stability are systematically performed, to evaluate and compare basic physicochemical properties of the oxides. At room temperature the average valence state of copper is found to be in 2.2–2.35 range, indicating oxygen deficiency in all of the compounds, which further increases with temperature. The conducted high-temperature X-ray diffraction tests reveal moderate, but anisotropic thermal expansion of La2-x(Sr,Ba)xCuO4-δ, with higher expansion at temperatures above 400 °C occurring along a-axis, due to the oxygen release. However, the corresponding chemical expansion effect is small and the materials possess moderate thermal expansion in the whole studied temperature range. All compounds show relatively high electrical conductivity at the elevated temperatures, related to the Cu2+/Cu3+ charge transfer, with the highest values recorded for La1.5Sr0.5CuO4-δ. Comprehensive studies of chemical stability of the selected La1.5Sr0.5CuO4-δ material with La0.8Sr0.2Ga0.8Mg0.2O3-δ solid electrolyte revealed complex behavior, with stability being dependent apart from temperature, also on morphology of the powders. A model describing such behavior is presented. While it is possible to minimize reactivity and characterize electrochemical properties of the La1.5Sr0.5CuO4-δ-based cathode layer, usage of the buffer layer is indispensable to maintain full stability. It is shown that mutual chemical compatibility of La1.5Sr0.5CuO4-δ and commonly used La0.4Ce0.6O2-δ buffer layer material is excellent, with no reactivity even at 1000 °C for prolonged time. Laboratory-scale fuel cell with the La1.5Sr0.5CuO4-δ cathode sintered at the optimized temperature is able to deliver 0.16 W cm−2 at 800 °C while fueled with wet hydrogen. |
| Keywords | Layered cuprates, Cathodic polarization, Chemical stability, LSGM, Buffer layer, SOFC |
| Remark |
https://doi.org/10.1016/j.ijhydene.2018.06.119 Link |
Sol-gel Zn, Fe modified SnO2 powders for CO sensors and magnetic applications
ID=483| Authors |
|
| Source |
Process Safety and Environmental Protection
Volume: 117,
Pages: 722-729 Time of Publication: 2018 |
| Abstract | Zn, Fe modified SnO2 powders were prepared by sol-gel method using Tripropylamine as chelating agent and Polyvinylpyrrolidone K90 as dispersant and stabilizer. Two compositions were taken into account: Zn, Fe modified SnO2 – 20 mol% Zn, 10 mol% Fe and Zn, Fe modified SnO2 – 20 mol% Zn, 30 mol% Fe, denoted further as SZFe1and SZFe2 respectively. The properties and the influence of Fe amount on structure, morphology and surface chemistry, electrical and magnetic properties have been investigated. The X-ray diffraction analysis showed the formation of a polycrystalline mixture of cassiterite – SnO2, hematite – Fe2O3, franklinite – ZnFe2O4 and zincite – ZnO for the samples with different Fe content. The magnetization of SZFe2 sample was found to be composed of a ferromagnetic and a paramagnetic phase. The presence of Fe in the powders composition improved the electrical properties, demonstrating performant features in sensing characteristics (tested in CO gas concentrations varied from 50 to 1000 ppm). The magnetic investigations suggest their possible future applications as soft magnetic materials. |
| Keywords | Oxides, Sol-gel chemistry, Surface properties, Electrical properties, CO gas sensor |
| Remark |
https://doi.org/10.1016/j.psep.2018.06.010 Link |
Optimization and Electrochemical Properties of Double Perovskite NdBaCo2O6–δ ·LaBaCo2O5+δ as Cathode Material for Solid Oxide Fuel Cell
ID=482| Authors |
|
| Source |
Journal of Nanoelectronics and Optoelectronics
Volume: 13,
Issue: 5,
Pages: 749-757(9) Time of Publication: 2018 |
| Abstract | In this paper, the double perovskite structure NdBaCo2O6–δ ·LaBaCo2O5+δ was used as cathode material for solid oxide fuel cell (SOFC). The cathode material was prepared using sol in situ composite method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical measurements systems. The NdBaCo2O6–δ and (Ce, Gd, O) were prepared to get NdBaCo2O6–δ –xCe0.8Gd0.1O1.75 (x = 0–10 wt%) and with the increase of the compound (Ce, Gd, O), the electrode polarization surface resistance changes. The polarization resistance at 700 °C was only 0.032 Ω cm2. The output power of single battery was 0.363 W/cm2. The sol–gel method was used to replace Co with Fe and LaBaCo2–x Fe x O5+δ (x = 0.0, 0.3, 0.5, 0.8) was prepared. It was observed that under different Fe contents, the polarization resistance of the composite cathode material LaBaCo2–x Fe x O5+δ decreases first and then increases. When x = 0.3, the minimum polarization resistance can be obtained, however, with the increase of temperature, the polarization resistance of the composite cathode material further reduced. |
| Remark |
DOI: https://doi.org/10.1166/jno.2018.2320 Link |
Electrochemical and degradation study of Sr0.6Na0.4SiO3-δ
ID=481| Authors |
|
| Source |
Journal of Solid State Electrochemistry
Volume: 22,
Issue: 10,
Pages: 3009–3013 Time of Publication: 2018 |
| Abstract | The high ionic conductivity of Na-doped SrSiO3 (SNS) is a topic of interest due to contradictory reports on its conductivity and stability by various groups. From a recent NMR study, it is proposed that Na+ is mainly responsible for ionic conductivity in an amorphous Na2Si2O5 phase present in SNS. The present study further extends to determine experimentally the ion transport number as well as material characteristics after long time annealing at 600 °C. The conductivity behavior of as-sintered and annealed nominally Sr0.6Na0.4SiO3-δ is investigated and a sharp fall (~ 2 order magnitude) of the same at 800 °C is found. An XPS study is included for comprehensive understanding of conductivity and degradation behavior of SNS material. On basis of the collective results, we propose a rational description of the conduction and material degradation of SNS. |
| Keywords | SrSiO3, Transport number, SOFC, Ionic conductivity, Protonic conductivity |
| Remark | Link |
Novel ReBaCo1.5Mn0.5O5+δ (Re: La, Pr, Nd, Sm, Gd and Y) perovskite oxide: influence of manganese doping on the crystal structure, oxygen nonstoichiometry, thermal expansion, transport properties, and application as a cathode material in solid oxide f
ID=480| Authors |
|
| Source |
Journal of Materials Chemistry A
Issue: 6,
Pages: 13271-13285 Time of Publication: 2018 |
| Abstract | In this work, a novel series of Mn-containing ReBaCo1.5Mn0.5O5+δ (Re: selected rare earth elements) perovskite-type oxides is studied, with systematic measurements of physicochemical properties being reported. Comparison with the very well-studied, parent ReBaCo2O5+δ allows determination of the role of the introduced manganese concerning modification of the crystal structure at room temperature and its evolution at high temperatures, variation of the oxygen content, thermal stability of the materials, and total electrical conductivity, as well as thermal and chemical expansion. Generally, the presence of Mn cations does not affect the tendency for A-site cation ordering, resulting in an increased unit cell volume of the compounds, as well as causing an increase of the oxygen content. Reduced thermal expansion, together with high values of electrical conductivity and suitable thermal stability, makes the compounds containing larger Re3+ cations attractive from the point of view of application as cathode materials in solid oxide fuel cells. Chemical compatibility studies reveal the sufficient stability of the considered perovskites in relation to Ce0.8Gd0.2O2−δ solid electrolyte, while unexpected, somewhat increased reactivity towards La0.8Sr0.2Ga0.8Mg0.2O3−δ and La0.4Ce0.6O2−δ is also reported. Furthermore, the electrochemical tests of the symmetric cells show strong dependence of the polarization resistance of the electrode on the synthesis and sintering temperatures. For the selected and optimized NdBaCo1.5Mn0.5O5+δ layer employed in the electrolyte-supported (LSGM) symmetric cell with a CGO buffer layer, the cathodic polarization resistance is 0.043 Ω cm2 at 900 °C. A wet hydrogen-fuelled button-type cell with the NdBaCo1.5Mn0.5O5+δ-based cathode is also prepared, delivering the maximum power density exceeding 1.3 W cm−2 at 850 °C. |
| Remark |
DOI: 10.1039/C8TA03479F Link |
High performance ceramic nanocomposite fuel cells utilizing LiNiCuZn-oxide anode based on slurry method
ID=479| Authors |
|
| Source |
International Journal of Hydrogen Energy
Time of Publication: 2018
|
| Abstract | A multi-oxide material LiNiCuZn-oxide was prepared through a slurry method as an anode for ceramic nanocomposite fuel cell (CNFC). The CNFCs using this anode material, LSCF as cathode material and a composite electrolyte consisting of CaSm co-doped CeO2 and (NaLiK)2CO3 produced ∼1.03 W/cm2 at 550 °C due to efficient reaction kinetics at the electrodes and high ionic transport in the nanocomposite electrolyte. The electrochemical impedance spectroscopy revealed low ionic transport losses (0.238 Ω cm2) and low polarization losses (0.124 Ω cm2) at the electrodes. The SEM measurements revealed the porous microstructures of the composite materials at electrode and the dense mixture of CaSm co-doped CeO2 and (NaLiK)2CO3. The Brunauer-Emmett-Teller (BET) analysis revealed high surface areas, 4.1 m2/g and 3.8 m2/g, of the anode and cathode respectively. This study provides a promising material for high performance CNFCs. |
| Keywords | Ceramic, Conductivity, Fuel cell, Multi-oxide, Nanocomposite, Synthesis |
| Remark |
https://doi.org/10.1016/j.ijhydene.2018.03.232 Link |
Enhanced Performance of Gadolinia-Doped Ceria Diffusion Barrier Layers Fabricated by Pulsed Laser Deposition for Large-Area Solid Oxide Fuel Cells
ID=478| Authors |
|
| Source |
ACS Appl. Energy Mater.
Time of Publication: 2018
|
| Abstract | Diffusion barrier layers are typically introduced in solid oxide fuel cells (SOFCs) to avoid reaction between state-of-the-art cathode and electrolyte materials, La1–xSrxCo1–yFeyO3-δ and yttria-stabilized zirconia (YSZ), respectively. However, commonly used layers of gadolinia-doped ceria (CGO) introduce overpotentials that significantly reduce the cell performance. This performance decrease is mainly due to the low density achievable with traditional deposition techniques, such as screen printing, at acceptable fabrication temperatures. In this work, perfectly dense and reproducible barrier layers for state-of-the-art cells (∼80 cm2) were implemented, for the first time, using large-area pulsed laser deposition (LA-PLD). In order to minimize cation interdiffusion, the low-temperature deposited barrier layers were thermally stabilized in the range between 1100 and 1400 °C. Significant enhanced performance is reported for cells stabilized at 1150 °C showing excellent power densities of 1.25 W·cm–2 at 0.7 V and at a operation temperature of 750 °C. Improved cells were finally included in a stack and operated in realistic conditions for 4500 h revealing low degradation rates (0.5%/1000 h) comparable to reference cells. This approach opens new perspectives in manufacturing highly reproducible and stable barrier layers for a new generation of SOFCs. |
| Keywords | Cation diffusion at CGO/YSZ interface; diffusion barrier layer; gadolinia doped ceria (CGO); pulsed laser deposition (PLD); solid oxide fuel cells (SOFCs); SrZrO3 |
| Remark |
DOI: 10.1021/acsaem.8b00039 Link |
Solid oxide fuel cells incorporating doped lanthanum gallate films deposited by radio-frequency magnetron sputtering at various Ar/O2 ratios and annealing conditions
ID=477| Authors |
|
| Source |
Surface and Coatings Technology
Volume: 344,
Pages: 507-513 Time of Publication: 2018 |
| Abstract | In this study, we prepared solid oxide fuel cells (SOFCs) incorporating a dense La0.87Sr0.13Ga0.88Mg0.12O3−δ (LSGM) film deposited by radio-frequency (RF) magnetron sputtering on an NiO-Sm0.2Ce0.8O2−δ (NiO-SDC) anode substrate. The influences of the Ar-O2 deposition atmosphere and the subsequent annealing conditions on the characteristics of the LSGM film and on the performance of the resulting SOFCs was investigated. LSGM targets with La0.76Sr0.24Ga0.63Mg0.37O3−δ composition and a deposition atmosphere with Ar/O2 ratios ranging from 10/0 to 5/5 were used throughout the study. Owing to the amorphous nature of the as-deposited LSGM films, the film deposited in an Ar/O2 = 10/0 atm required post-annealing at 950 °C for 4 h for crystallization and removal of the SrLaGa2O7 content, while the films deposited at lower Ar/O2 ratios required higher crystallization temperatures: for instance, the films deposited at Ar/O2 = 6/4 had to be annealed at 1100 °C for 2 h. The anode-supported substrates were then screen-printed with a La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF)-LSGM cathode layer and fired to form SOFC cells. The single cell incorporating an LSGM film with La0.87Sr0.13Ga0.88Mg0.12O3−δ composition deposited in a pure Ar atmosphere exhibited the lowest cell resistance and thus the highest maximum power density (MPD) at all operating temperatures. The total resistance of the single cell incorporating a 4.3 μm-thick LSGM film decreased from 0.386 to 0.121 Ω cm2 as the temperature increased from 650 to 850 °C, and the open circuit voltages ranged from 0.941 to 0.861 V. The maximum power density of the single cell was 0.422, 0.736, and 1.105 W cm−2 at 650, 750, and 850 °C, respectively. |
| Keywords | Solid oxide fuel cell, Sputtering, Electrolyte, Doped lanthanum gallate |
| Remark |
https://doi.org/10.1016/j.surfcoat.2018.03.073 Link |
Influence of annealing at intermediate temperature on oxygen transport kinetics of Pr2NiO4+δ
ID=476| Authors |
|
| Source |
J. Mater. Chem. A
Volume: 6,
Pages: 8331-8339 Time of Publication: 2018 |
| Abstract | Electrical conductivity relaxation (ECR) and oxygen permeation measurements were conducted, at 750 °C, to assess the long-term oxygen transport characteristics of the mixed ionic–electronic conducting Pr2NiO4+δ with a K2NiF4 structure. The results show that the apparent values for the oxygen diffusion and surface exchange coefficients extracted from the data and the associated oxygen flux increase over 120 h by 1–2 orders of magnitude. The results of post-mortem X-ray diffraction analysis of the samples show partial to virtually complete decomposition of Pr2NiO4+δ under the conditions of the experiments to Pr4Ni3O10+δ, PrNiO3−δ, Pr6O11, and traces of NiO. Pulse 18O–16O isotopic exchange (PIE) measurements confirmed fast surface exchange kinetics of the higher-order Ruddlesden–Popper phase Pr4Ni3O10+δ and Pr6O11 formed upon decomposition. Additional factors related to the microstructure, however, need to be considered to explain the observations. |
| Remark | Link |
Thermoelectric properties of (1-x)LaCoO3.xLa0.7Sr0.3MnO3 composite
ID=475| Authors |
|
| Source |
Journal of Alloys and Compounds
Volume: 749,
Pages: 1092-1097 Time of Publication: 2018 |
| Abstract | We report the thermoelectric (TE) properties of (1-x)LaCoO3.xLa0.7Sr0.3MnO3 (0 < x < 0.50) composite in a temperature range 320–800 K. Addition of La0.7Sr0.3MnO3 to LaCoO3 in small amount (5 weight %) improves the overall Seebeck coefficient (α) at higher temperatures. The electrical conductivity however decreases due to a decrease in carrier concentration of the composite. The decrease in electrical conductivity of the composite at high temperature may be attributed to the insulating nature of the LSMO above room temperature. Thermal conductivity (κ) of all the samples increases with an increase in the temperature, but decreases with increasing LSMO content. We also report the local variation of Seebeck coefficient across the composite samples measured using a precision Seebeck measurement system. A maximum value of 0.09 for the figure of merit (ZT) is obtained for 0.95LaCoO3.0.05La0.7Sr0.3MnO3 at 620 K which is significantly higher than the ZT of either of LaCoO3 or La0.7Sr0.3MnO3 at 620 K. This suggests the potential for enhancement of operating temperatures of hitherto well known low temperature thermoelectric materials through suitable compositing approach. |
| Keywords | Thermal conductivity, Electrical conductivity, Perovskites, Manganites, Cobaltate, Composite |
| Remark |
https://doi.org/10.1016/j.jallcom.2018.03.347 Link |
Lanthanum doped strontium titanate - ceria anodes: deconvolution of impedance spectra and relationship with composition and microstructure
ID=474| Authors |
|
| Source |
Journal of Power Sources
Volume: 385,
Pages: 62-75 Time of Publication: 2018 |
| Abstract | Electrochemical performance of ceramic (Ni-free) SOFC anodes based on La0.2Sr0.7TiO3-δ (LST) and Gd0.1Ce0.9O1.95-δ (CGO) is thoroughly investigated. Microstructures and compositions are systematically varied around the percolation thresholds of both phases by modification of phase volume fractions, particle size distributions and firing temperature. Differential impedance spectroscopy was performed while varying gas composition, electrical potential and operating temperature, which allows determining four distinct electrode processes. Significant anode impedances are measured at low frequencies, which in contrast to the literature cannot be linked with gas concentration impedance. The dominant low frequency process (∼1 Hz) is attributed to the chemical capacitance. Combined EIS and microstructure investigations show that the chemical capacitance correlates inversely with the available surface area of CGO, indicating CGO surface reactions as the kinetic limitation for the dominant anode process and for the associated chemical capacitance. In anodes with a fine-grained microstructure this limitation is significantly smaller, which results in an impressive power output as high as 0.34 Wcm−2. The anodes show high redox stability by not only withstanding 30 isothermal redox cycles, but even improving the performance. Hence, compared to conventional Ni-cermet anodes the new LST-CGO material represents an interesting alternative with much improved redox-stability. |
| Keywords | SOFC, LST, Microstructure analysis, Electrochemical impedance, Spectroscopy, Redox Anodes |
| Remark |
https://doi.org/10.1016/j.jpowsour.2018.03.024 Link |
Influence of texture and grain misorientation on the ionic conduction in multilayered solid electrolytes – interface strain effects in competition with blocking grain boundaries
ID=473| Authors |
|
| Source |
Physical Chemistry Chemical Physics
Issue: 14
Time of Publication: 2018
|
| Abstract | Interface strain and its influence on the ionic transport along hetero-interfaces has gained a lot of attention over the last decade and is controversially discussed. We investigate the relaxation of mismatch induced interfacial strain as a function of the degree of orientation/texture of the columnar crystallites and assess the impact on the oxygen ion conductivity in Er2O3/YSZ multilayer systems. Results from X-ray diffraction clearly show, that the width of the strained hetero-interface region increases with an increasing degree of orientation of the crystallites. The combined impact of film texture and strain at the hetero-interfaces of the film on the ionic conductivity however is not easily deduced from these measurements. The samples with the highest degree of orientation, i.e. with only one azimuthal variant, show strong anisotropic electrical properties. In samples with a lower degree of orientation, i.e. samples with a fiber texture, anisotropic properties cannot be detected, possibly due to a geometrical averaging of the electrical properties. The expected strain induced monotonic increase of the ionic conductivity with decreasing layer thickness and thus increasing interfacial influence could only be detected for samples with a fiber texture and a considerable degree of crystallite misorientation. This leads to the important conclusion that the texture and therefore the nature of the grain boundaries and their network influence the ionic conductivity of the multilayer thin films in the same order of magnitude as the misfit induced interface strain. Thus, the potential design of strain-controlled ionic conductors requires additionally the control of the microstructure in terms of grain orientation. |
| Remark | Link |
Crystal Structure, Hydration, and Two-Fold/Single-Fold Diffusion Kinetics in Proton-Conducting Ba0.9La0.1Zr0.25Sn0.25In0.5O3−a Oxide
ID=472| Authors |
|
| Source |
Crystals
Volume: 8,
Issue: 3,
Pages: 136 Time of Publication: 2018 |
| Abstract | In this work, hydration kinetics related to the incorporation of water into proton-conducting Ba0.9La0.1Zr0.25Sn0.25In0.5O3−a perovskite-type oxide are presented, with a recorded transition on temperature from a single-fold to a two-fold behavior. This can be correlated with an appearance of the electronic hole component of the conductivity at high temperatures. The collected electrical conductivity relaxation data allowed to calculate chemical diffusion coefficient D and surface exchange reaction coefficient k, as well as respective activation energies of their changes on temperature. Presented results are supplemented with a systematic characterization of the structural properties of materials synthesized at different temperatures, amount of incorporated water after hydration in different conditions, influence of water content on the crystal structure, as well as electrical conductivity in dry, H2O- and D2O-containing air, which enabled to evaluate proton (deuterium) conductivity. |
| Keywords | Perovskite oxides; substituted barium indate; hydration; proton conductivity; relaxation experiments; coupled/decoupled ionic transport. |
| Remark |
doi:10.3390/cryst8030136 Link |
Sol-gel synthesis of ZnO/Zn2-xFexTiO4 powders: structural properties, electrical conductivity and dielectric behavior
ID=471| Authors |
|
| Source |
Journal of Sol-Gel Science and Technology
Volume: 86,
Issue: 1,
Pages: 151–161 Time of Publication: 2018 |
| Abstract | The aim of this work was an investigation of structural and electrical properties of ZnO/Zn2-xFexTiO4 (x = 0.7, 1, 1.4) powders. The compounds obtained by sol-gel method are characterized by several techniques: X-ray diffraction (XRD), N2 adsorption–desorption isotherms, scanning and transmission electron microscopy (SEM and TEM), X-ray photoelectron spectroscopy (XPS), electrical and dielectrical measurements. The XRD, SEM and XPS analysis confirmed the formation of ZnFeTiO4 inverse spinel structure. The electrical and dielectrical properties of ZnO/Zn2-xFexTiO4 (x = 0.7, 1, 1.4) were measured by impedance spectroscopy, revealing a decrease in the electrical conductivity and the dielectric constant with Fe content. |
| Keywords | Sol-gel, ZnO/ZnFeTiO4, dielectric constant, AC conductivity |
| Remark | Link |
p-Type/n-type behaviour and functional properties of KxNa(1-x)NbO3 (0.49 ≤ x ≤ 0.51) sintered in air and N2
ID=470| Authors |
|
| Source |
Journal of the European Ceramic Society
Volume: 38,
Issue: 9,
Pages: 3118-3126 Time of Publication: 2018 |
| Abstract | Potassium sodium niobate (KNN) is a potential candidate to replace lead zirconate titanate in sensor and actuator applications but there are many fundamental science and materials processing issues to be understood before it can be used commercially, including the influence of composition and processing atmosphere on the conduction mechanisms and functional properties. Consequently, KNN pellets with different K/Na ratios were sintered to 95% relative density in air and N2 using a conventional mixed oxide route. Oxygen vacancies (VO••) played a major role in the semi-conduction mechanism in low p(O2) for all compositions. Impedance spectroscopy and thermo-power data confirmed KNN to be n-type in low p(O2) in contradiction to previous reports of p-type behaviour. The best piezoelectric properties were observed for air- rather than N2-sintered samples with d33 = 125 pC/N and kp = 0.38 obtained for K0.51Na0.49NbO3. |
| Keywords | p-Type, n-Type, Low p(O2), Oxygen vacancies, Seebeck coefficient |
| Remark |
https://doi.org/10.1016/j.jeurceramsoc.2018.03.013 Link |
La1.8Sr0.2Ni0.8M0.2O4 (M = Fe, Co, or Cu) Complex Oxides: Synthesis, Structural Characterization, and Dielectric Properties
ID=469| Authors |
|
| Source |
Russian Journal of Inorganic Chemistry
Volume: 63,
Issue: 2,
Pages: 141–148 Time of Publication: 2018 |
| Abstract | New solid solutions La1.8Sr0.2Ni0.8M0.2O4 (M = Fe, Co, or Cu) have been prepared, and their crystal- chemical characteristics and electric properties studied. The studied materials have been shown to have activation-time conductivity. Structural distortions have been found to affect the dielectric properties of ceramic samples. La1.8Sr0.2Ni0.8M0.2O4 is observed to have the greatest distortion of АО9 coordination polyhedra and a higher dielectric constant. |
| Remark | Link |
Inter-diffusion across a direct p-n heterojunction of Li-doped NiO and Al-doped ZnO
ID=468| Authors |
|
| Source |
Solid State Ionics
Volume: 320,
Pages: 215-220 Time of Publication: 2018 |
| Abstract | We herein report inter-diffusion across the interface between p-type Ni0.98Li0.02O and n-type Zn0.98Al0.02O for various applications including p-n-heterojunction diodes and oxide thermoelectrics. Diffusion couples were made of polished surfaces of ceramic samples pre-sintered at 1250 and 1350 °C for Ni0.98Li0.02O and Zn0.98Al0.02O, respectively. The inter-diffusion couples were annealed at 900–1200 °C for 160 h in ambient air. Electron Probe Micro Analysis (EPMA) was used to acquire diffusion profiles, followed by fitting to Ficks second law and Whipple–Le Claires models for bulk and grain-boundary diffusion calculation, respectively. Zn2+ diffused into Ni0.98Li0.02O mainly by bulk diffusion with an activation energy of 250 ± 10 kJ/mol, whereas Ni2+ diffused into Zn0.98Al0.02O by both bulk and enhanced grain boundary diffusion with activation energies of 320 ± 120 kJ/mol and 245 ± 50 kJ/mol, respectively. The amount of Al3+ diffused from the Al-doped ZnO into the NiO phase was too small for a corresponding diffusion coefficient to be calculated. Li-ion distribution and diffusivity were not determined due to lack of analyzer sensitivity for Li. The bulk and effective diffusivities of Zn2+ and Ni2+ into NiO and ZnO enable prediction of inter-diffusion lengths as a function of time and temperature, allowing estimates of device performance, stability, and lifetimes at different operation temperatures. |
| Keywords | NiO, ZnO, Cation diffusion, Grain-boundary diffusion, p-n junction |
| Remark |
https://doi.org/10.1016/j.ssi.2018.03.011 Link |
Electrochemical promotion of nanodispersed Ru-Co catalysts for the hydrogenation of CO2
ID=467| Authors |
|
| Source |
Applied Catalysis B: Environmental
Volume: 232,
Pages: 60-68 Time of Publication: 2018 |
| Abstract | Electrochemical promotion of the CO2 hydrogenation to CH4 and CO on a nanodispersed Ru-Co catalyst has been achieved via slurry deposition of the nanodispersed catalyst on an interlayer Ru film deposited on a BZY (BaZr0.85Y0.15O3) proton conducting solid electrolyte disc. The effect of current is nonFaradaic, with Faradaic efficiency values as high as 60 and leads to a reversible variation of the selectivity to CH4 between 16% and 41%. Due to thermal spillover of protons on the Ru-Co catalyst surface, the open circuit selectivity to CO is quite high, i.e. up to 84% and similar values are obtained via negative potential application, i.e. proton supply to the Ru catalyst film deposited on BZY before the deposition of the nanodispersed catalyst. These results underline the similarity between electrochemical promotion and metal support interactions when using proton conducting supports. They also show the usefulness of electrochemical promotion for mechanistic investigations. The electrochemical promotion of nanodispersed catalysts is a promising step for the practical utilization of electrochemical promotion. |
| Keywords | Electrochemical promotion, EPOC, NEMCA effect, CO2 hydrogenation, Dispersed catalyst, BZY |
| Remark |
https://doi.org/10.1016/j.apcatb.2018.03.031 Link |
Structural transformations, water incorporation and transport properties of tin-substituted barium indate
ID=466| Authors |
|
| Source |
Journal of Solid State Chemistry
Volume: 262,
Pages: 58-67 Time of Publication: 2018 |
| Abstract | Incorporation of water into tin-substituted BaIn1-xSnxO3-δ (x = 0.1–0.3) is shown to influence crystal structure at room temperature, structural transformations at high temperatures and ionic transport properties of the materials. Increasing tin content stabilizes oxygen vacancy-disordered perovskite-type phase, which together with large changes of the unit cell volume occurring during hydration and dehydration processes, result in a complex structural behavior, as documented by high-temperature X-ray diffraction and thermogravimetric studies. Impedance spectroscopy measurements at elevated temperatures (350–800 °C) revealed very high proton conductivity in BaIn.8Sn.2O3-δ, exceeding 1.1·10−3 S cm−1 at 500 °C, with high values of the transference number in wet air. At the same time, relaxation kinetics of the electrical conductivity showed a monotonous nature, which indicates negligible component of the electronic hole conductivity in the hydrated material. The oxides are extremely moisture-sensitive, which results in a significant mechanical stability problems, affecting possibility to prepare electrolyte membranes. |
| Keywords | Barium indate, Hydration, Structural transformations, Proton conductivity, Relaxation experiments |
| Remark |
https://doi.org/10.1016/j.jssc.2018.03.004 Link |
Single-crystal x-ray diffraction and impedance spectroscopy investigations of the RbxCs1-xH2PO4 (0≤x≤1) proton conductor series
ID=465| Authors |
|
| Source |
Journal of Physics and Chemistry of Solids
Volume: 118,
Pages: 200-210 Time of Publication: 2018 |
| Abstract | We have used single-crystal x-ray diffraction to investigate the structural modifications induced by Rb-doping of the superprotonic conductor CsH2PO4. We found that the monoclinic P21/m CsH2PO4 modification persists within the RbxCs1-xH2PO4 (0 ≤ x ≤ 1) series upon Rb-doping from x = 0.1 to x = 0.7. Rb0.8Cs0.2H2PO4 (x = 0.8), however, exhibits a previously unreported P21/c monoclinic phase, where the mirror plane is lost and disorder is present in the PO4 tetrahedra even at room temperature. Higher levels of x display a tetragonal I-42d unit cell isomorphic with the known structure of RbH2PO4. The temperature dependence of the proton conductivity determined from impedance spectroscopy data collected within the 160⁰C-250 °C range is also markedly different at high Rb-doping levels, x ≥ 0.8. Finally, we found that Rb0.9Cs0.1H2PO4 undergoes a transition from its room-temperature tetragonal I-42d phase to an intermediate-temperature monoclinic P21/m modification at a significantly lower temperature (∼80 °C) than its RbH2PO4 counterpart (∼120 °C). |
| Remark |
https://doi.org/10.1016/j.jpcs.2018.03.011 Link |
Performance evaluation of Mn and Fe doped SrCo 0.9 Nb 0.1 O 3-δ cathode for IT-SOFC application
ID=464| Authors |
|
| Source |
IOP Conference Series: Materials Science and Engineering
Volume: 310
|
| Abstract | Cathode materials of Mn and Fe doped SrCo0.9Nb0.1O3-δ, are synthesized by solid state route for intermediate temperature fuel cell applications. Phase pure material is obtained after calcining the precursors at 1100oC. Phase compatibility is observed between this novel cathode material with gadolinia doped ceria (GDC)electrolyte material as reflected in the diffraction pattern. The state of art YSZ electrolyte is not compatible with this cathode material. Average thermal expansion coefficient of the material varies between 17 to 22 X 10-6 K-1 on doping, from room temperature to 800 oC. Increase in thermal expansion coefficient is observed with Mn and Fe doping associated with the loss of oxygen from the crystal. The electrical conductivity of the cathode material decreases with Fe and Mn doping. Mn doped samples show lowest conductivity. From the symmetric cell measurement lower area specific resistance (0.16 Ω-cm2) is obtained for un-doped samples, at 850 oC. From the initial results it can be inferred that Mn/Fe doping improves neither the thermal expansion coefficient nor the electrochemical activity. |
| Remark | Link |
Does the conductivity of interconnect coatings matter for solid oxide fuel cell applications?
ID=463| Authors |
|
| Source |
Journal of Power Sources
Volume: 383,
Pages: 110-114 Time of Publication: 2018 |
| Abstract | The present work aims to quantify the influence of typical interconnect coatings used for solid oxide fuel cells (SOFC) on area specific resistance (ASR). To quantify the effect of the coating, the dependency of coating thickness on the ASR is examined on Crofer 22 APU at 600 °C. Three different Co coating thicknesses are investigated, 600 nm, 1500 nm, and 3000 nm. Except for the reference samples, the material is pre-oxidized prior to coating to mitigate the outward diffusion of iron and consequent formation of poorly conducting (Co,Fe)3O4 spinel. Exposures are carried out at 600 °C in stagnant laboratory air for 500 h and subsequent ASR measurements are performed. Additionally the microstructure is investigated with scanning electron microscopy (SEM). On all pre-oxidized samples, a homogenous dense Co3O4 top layer is observed beneath which a thin layer of Cr2O3 is present. As the ASR values range between 7 and 12 mΩcm2 for all pre-oxidized samples, even though different Co3O4 thicknesses are observed, the results strongly suggest that for most applicable cases the impact of the coating on ASR is negligible and the main contributor is Cr2O3. |
| Keywords | Solid oxide fuel cell, Interconnect, Corrosion, Coating, Area specific resistance, Cr2O3 |
| Remark |
https://doi.org/10.1016/j.jpowsour.2018.02.060 Link |
